Coffee by The Hang +

Citrus • Floral • Bright

Citrus • Floral • Bright

Marsellesa
$16.00

Marsellesa is a high-yielding, rust-resistant 100% Arabica coffee variety (Sarchimor Caturra) increasingly cultivated in Guatemala, particularly in regions like Acatenango and Fraijanes.

Known for a specialty-grade cup profile, it typically offers chocolate, caramel, citrus, and floral notes at altitudes around 1,300–1,700+

COFFEE GRADE: Huehuetenango SHB EP Fully Washed

FARM/COOP/STATION: Finca La Burbuja

VARIETAL: Catuai, Caturra

PROCESSING: Fully washed

ALTITUDE: 1,675 meters above sea level

OWNER: Silvia Carolina Ramos Diaz & family

SUBREGION/TOWN: El Jutal, La Libertad

REGION: Huehuetenango

HARVEST MONTHS: November - April


Gesha
$20.00

Gesha is a prized 100% Arabica coffee variety renowned for its exceptional cup quality and elegant, complex profile. Grown in Guatemala in high-elevation regions such as Acatenango, Huehuetenango, and Antigua, it thrives at altitudes around 1,500–2,000+ meters.

Known for a highly aromatic, specialty-grade cup, it typically offers jasmine, bergamot, stone fruit, citrus, and tea-like floral notes.

choose your style

Brew guides to simplify and maximize your coffee drinking

  • Grind the coffee
    Grind your coffee to a medium-coarse consistency.

    Measure coffee and water
    Use a 1:17 coffee-to-water ratio. For example, use 28 g of coffee, about 4 tablespoons, for 475 ml, or 16 oz, of water.

    Add water
    Measure filtered water and pour it into the machine’s reservoir.

    Prepare the filter
    Place a fresh filter in the brew basket. Add the ground coffee and gently level it.

    Brew
    Start the machine and let it roll.

    Serve and enjoy
    Drink it up!

  • Grind and dose the coffee
    Grind 19.5 g of coffee to a texture similar to confectioners’ sugar, directly into the portafilter. Tap the portafilter once or twice to settle the grounds, distribute them evenly with your finger, and tamp until you feel resistance. Make sure the coffee bed is level.

    Prep the machine
    Purge water through the grouphead to ensure the machine is fully heated. Then lock the portafilter into place.

    Pull the shot
    Engage the grouphead and start your timer. Place a cup under the portafilter and watch for a steady stream that looks like thin mouse tails. Aim for an extraction time of 23 to 28 seconds and a yield of about 1.5 oz of espresso.

    Adjust as needed
    If the shot runs too slowly or takes too long, grind a little coarser. If it runs too quickly, grind a little finer.

    Serve and enjoy
    Drink it up!

  • Prep and preheat
    Fill your kettle with filtered water and heat it to just below boiling. Rinse the empty French press with hot water to preheat it, then discard the rinse water.

    Weigh and grind the coffee
    Measure 56 g of coffee, about 8 tablespoons, and grind it coarse, like breadcrumbs. Add the grounds to the French press and gently shake to level them. If you’re using a scale, tare it now.

    Add water
    Start your timer as you pour. Add 450 g of hot water, making sure all the grounds are saturated. Place the lid on top to keep the heat in, but do not press.

    Stir
    At 1:00, remove the lid and gently stir the grounds into the water.

    Add more water
    Pour in more water until you reach 850 g total, filling the press to the top of the metal collar. Replace the lid and let the coffee continue brewing without pressing.

    Press
    At 4:00, firmly press the plunger all the way down. If the French press is sitting on a scale, move it to the counter first.

    Serve and enjoy
    Drink it up!

  • Grind the coffee
    Grind your coffee to a medium consistency, similar to sea salt.

    Prep the brewer
    Place a filter in the dripper and rinse it thoroughly with hot water. This warms the brewer and removes any paper taste. Discard the rinse water.

    Measure coffee and water
    Use a 1:16 coffee-to-water ratio. For example, use 25 g of coffee for 400 g of water.

    Add the coffee
    Place the ground coffee in the filter and gently shake to level the bed.

    Bloom
    Start your timer and pour just enough hot water to saturate the grounds evenly. Let the coffee bloom for about 30 to 45 seconds.

    Continue pouring
    Slowly add the remaining water in steady circles, keeping the grounds evenly saturated. Pour in stages until you reach your total water weight.

    Let it drain
    Allow the water to pass completely through the coffee bed. The total brew time should be about 3 to 4 minutes.

    Serve and enjoy
    Drink it up!